Blue Campaign Dresser

Well, this was a fun piece to do!  I found this piece originally on Craigslist and was excited to get started right away.  I spent a lot of time working on the brass hardware (see my prior posts) to get them cleaned up and shiny.  I am really happy with how the piece turned out.  This bright blue really brings out the brass hardware and gives it a more contemporary feeling.  This would look great in any part of the house — from a bedroom to an entryway or a media console.  Check out the before and afters below!  Contact me if you are interested!

Campaign Before

IMG_0985

IMG_0986

IMG_0994

IMG_0988

How to Make Your Brass Hardware Pieces Really Shine!

Happy Thursday!

Last week I posted about using Bar Keeper’s Friend to remove vanish from old brass hardware.  The before and after pictures were pretty impressive, but I was hoping for a little brighter of a  gold finish on these pieces, so I wanted to try one more option.  I have read on a lot about a product called “Rub n’ Buff” – this is basically paint that comes in a little tube that you apply to almost any finish.  I ordered the Golf Leaf color, but there are many more to choose from.

GoldPaint

I was so excited when it arrived yesterday that I immediately gave it a try.  I applied a little bit of the product onto a soft cloth and rubbed it evenly on the entire front surface of the hardware.  WOW!!  The result was exactly what I was hoping for – it completely brightened up the hardware, but left the authenticity of the piece.  You really could never tell the product was added, if looks very “natural”!!  See the picture below — the left side shows the “After” and the right side is the “Before” — big difference!

Before and After 2

Well- short post,  but hopefully you find this tip helpful!  To me, this little things make such a huge difference on a piece – so, I was excited to share!

xoxo-Sonni

Brasso vs. Bar Keeper’s Friend

B vs B
Brasso vs. Bar Keeper’s Friend

I bought a campaign dresser this past weekend (which is really exciting, as these are hard to find).  So, as I started to remove the hardware pieces, I began searching online for the best tips to remove the existing vanish and shine up these brass pieces.  It was clear that many people like to use the product Brasso, so I thought I would start there.

I removed all of the hardware, which was a lot more difficult that I originally thought it would be. Most of these pieces are attached with nails, so I had to do some major macgyvering to get them off.  Glad that part is done!!

First issue: some of the pieces were covered with paint, so I had to remove that first.

  • In a large pot, I boiled 4 cups of water and put in ¼ cup of baking soda.
  • I placed the hardware with the paint in this pot and let it sit in the boiling water for about 20 minutes. When I removed the hardware, the paint easily came off when I ran it under water.

Second issue: vanish!  According to many online sources,  I needed to put the hardware in a “Brasso bath” –so,  I literally put all of the pieces in a casserole dish and covered everything with the entire bottle of Brasso.  I let them sit for about 20-30 minutes.  See the pictures below – the ones of the left are the Brasso pieces and the three on the left are the Bar Keeper’s Friend ones..

Dirty vs Clean

So, after the “bath” I washed them off and, to say I was disappointed was an understatement,  this was not going to work.  What to do?  I had some Bar Keeper’s Friend under my sink that I decided to try.  Equipped with an old toothbrush and some Bar Keeper’s Friend mixed with a little water, I went to work!  WOW!! What a difference – this stuff worked!  It was fast and effective – see the pictures below – you can see the “Brasso” pieces on the right side and the beautiful “Bar Keeper’s Friend” pieces on the left – big difference!

Handles

I am excited to know how to handle these hardware pieces in the future!  This will make a huge difference in the furniture pieces I select going forward and how I handle the hardware.  I ordered some Rub ‘n Buff Wax to try out on some of the pieces of hardware that have a little more wear and tear – so, I will keep you posted on how this works next week.

Thanks!

xoxo-Sonni